It is frustrating to need work done to your HVAC system when it is super hot or super cold. Learning what you can about HVAC systems prior to contacting a professional will help you fix them or maintain them. Read this article to get started on to do just that.
Know the name and type of your HVAC system you currently have before looking for a repair person. This will enable you know that you’re able to give the contractor the information they might need.
If you are having issues with your HVAC, do a tour of your house before you call in help. Note which of your rooms are hot and which are cold. This can help contractors quickly figure out the issue and how to fix it easily and quickly.
If you have some problems with the HVAC system, take a tour of the house prior to calling a professional. This will help the repairman determine where the problem is and how to fix it.
Know what you want done before you hire a contractor. It will be hard for a contractor to provide you a price estimate on the phone if they have not seen your current system. It will be way more hard if you don’t know what’s wrong.
Clean any debris that accumulates on an external condenser unit. Wind can pile up all sorts of debris against its grill. Overheating could occur, which will be problematic.
Clean your fan blades and coils prior to summertime. Clean the outside of your condenser unit.
Clean the debris off your condenser units. Debris can pile up at rates that increase during rainy or windy weather, bringing potential damage with it. It can cause your system by overheating.
Each spring, try cleaning the fan blades and coils on the condenser fan. Before you begin cleaning the unit, make sure that it is unplugged. Next, remove the grill, take the blades and clean them gently, then clean the actual unit.
Sae 20 Oil
Lubricate your condenser at least once each year. You will notice these ports have a rubber or metal caps covering them. Use SAE 20 oil that is non-detergent and lightweight, detergent-free SAE 20 oil, but make sure to avoid overfilling them.
Some fan condensers may contain oil parts, and if yours does, ensure it is lubricated at least once per year. These are usually covered with rubber or metal caps. Get an oil that is SAE 20 and put about 10 drops into each port, but don’t overfill it.
Put outdoor condensers in places with shade.
Turn off any outdoor condenser units when weather gets cold. This means that you should turn it off to prevent damage if the temperature drops below 60ºF to avoid damage. This simple tip will help keep the system working for many years and save you a lot on repairs.
When the weather cools down, turn your outdoor condenser off. If the temperature outside is less than 60ºF, be sure to turn off the unit so that you don’t damage it. This will allow your system to work well every year, and that saves you quite a bit on making repairs.
Air conditioners tend to ice up.The drain line might also freeze up.If you see this happen, switch the thermostat in your home to fan only so the compressor is disabled. You should call a pro to fix this problem, but switching to the fan will make the ice melt.
Look for calculators online to truly understand what size of unit you need for your home. Look at the manual or on the recommended size for this information.
A programmable thermostat is a simple way to help save money on air conditioning costs. Such thermostats help you save around ten percent when it comes to energy costs. Take advantage of the convenience of the ability to control many programable thermostats from your favorite electronic device.
Companies that are well established have a better record than those that haven’t been. Hiring a newer contractor means taking a considerable risk.
Ask your friends and relations for contractor recommendations. People who’ve had a good experience are usually willing to tell of their contractor. This will also provide you to avoid undesirable companies.
To keep your system running smoothly have your system serviced once a year. The contractor should oil the parts that move and check the motor and freon levels. All of these little jobs will add up to big savings in energy use, with the improved efficiency.
There are a few sites these days that let customers talk about their experiences with different services. This is useful for finding people that you wish to work and those that you don’t.
Contractors charge different rates, so make sure to get multiple quotes. You have the potential to save tons of money by asking for many quotes. Call at least four or five different HVAC specialist to find the best deal possible.
Save energy use and money by turning off the air conditioner if there is nobody home. Turning it off does allow the temperature to rise, but only so far. Leaving your heating or cooling running full blast while you are away is a waste of money and energy.
You may find it difficult to hire an HVAC expert without a little bit of prior knowledge. The process isn’t bad when you are educated about it. With the information given, you will hopefully be prepared now.
