It can be difficult for many homeowners to know where to turn when their heating or cooling system isn’t working properly. To stop such a situation from becoming a real disaster, it is worth taking the time to learn about the subject. This article was put together to help conscientious homeowners learn how to hire the help they need.
Before an HVAC expert comes to your home to do any repair work, do a short tour of the entire home. This information will help the repairman determine what the problem is and how to fix it.
Before calling anyone to repair your system, know what system you have. Write down the brand and the model and have all maintenance records on hand. This will help you give the new contractor the necessary information.
Clean your condenser’s fan blades and coils each spring to ensure that your condenser fan operates at it’s best. Clean off any leaves or debris from your condenser unit regularly.
Clean the debris that accumulates on your condenser unit. Debris can pile up at rates that increase during rainy or windy weather, bringing potential damage with it. It can also cause your system to malfunction by overheating.
Outdoor condenser units need to be cleaned regularly. Leaves, twigs and other troublesome objects can accumulate, particularly after very windy weather, and this will wreak havoc on your system. It can cause the unit to overheat and break down.
Turn it off first so nothing moves. Next, pop off the grill, put the blades out and start to gently clean them along with the unit.
Don’t get grass clippings pile up against your outdoor condenser. Aim the grass cuttings in a different direction away from the unit. This also applies when you are taking care of the leaves in debris.
Clean the fan blades and coils in your condenser each spring. Don’t forget to disconnect the power first. Then remove the grill, remove the blades and clean it from top to bottom gently.
Your HVAC units might suffer when your trees lose their leaves. Make sure the fan’s grill often during the fall. The fan must be unobstructed to work properly, and if it is clogged, you will end up with many headaches with the unit.
Put your outdoor unit in the shade if you are installing them.
When you cut the grass, make sure your mower isn’t tossing clippings toward your outdoor units. When you work with your lawn mower, make sure it spits the grass to the side opposite of your unit. Do the same when blowing snow or leaves.
A programmable thermostat is a simple way to help you save money on your air conditioning bill. Some can even be controlled from your smart phone or computer.
During the visit, they will inspect the motor of the system, oil the moving parts and check the freon levels in the system. These few simple things will keep your system to run at its peak performance.
Make certain that an outdoor unit is in the shade. Your unit won’t have to work as hard to cool the inside air if the outside air it sucks from is cooler.
Do not allow your house get extremely hot. An air conditioning unit is really only able to reduce the temperature by 20ºF quickly. If the temperature in your home rises to 100 degrees F or higher, you will only be able to cool it down to 80. This won’t be a safe and comfortable temperature for you to sleep in.
Nobody ever wants their heating and/or cooling systems to go out when it is really hot or really cold. However, if the homeowner has usable knowledge, a complete catastrophe can be avoided. Use these suggestions to increase the performance of your unit.
If possible, put your HVAC in a shaded area if it is outside. This will ensure cool air is sucked in, meaning less cooling must be done by the unit.
